Selby Boat Centre

About Us

Social Media

twitter @selbyboatcentre.co.uk

fb facebook

 

 

Selby Canalcanal

Engineering at Selby Boat Centre

All Engineering services performed at Selby Boat Centre are via our Sister Company SimNic Engineering Limited.

Servicing & Maintenance

 

We offer a full range of servicing and maintenance options for all types of boats, and can perform the following professional services, with all work guaranteed. All work is normally done in-house with our own skilled staff, however we may on occasion outsource work to one of our specialist preferred contractors if required, but don't worry all work will be to the same high standard and is still fully guarenteed by us. We also offer undercover engineering facilities for any DIY activities.

Webasto - Main Distributor, Service & Sales Centre for Air Heaters, Water Heaters & Air conditioning systems.

Engine Bay - Both inboard and outboard engines, including stern drives and out drives

Propellers - All types

Electrical - From complete rewiring to replacing a fuse

Gas (Gas Safe Register approved) - Full installs or just a gas test

Plumbing - From full systems to a hose connector or pump

Joinery - Full fit-out to a piece of beading

Welding - Re plating, or fitting some anodes

Fabrication - We will try and make anything you need if we cannot buy you one

Fibre glass and epoxy - From small filling jobs to large rebuilds

Painting, Blacking and Antifouling - Any hull type or material

Heating and Air conditioning - Full range of water and air heaters, air conditioning and climate control systems

 

Fixed Rate On-Site Servicing Available

(Heater or Engine brought to us - does not include removal or refitting)

Webasto Heaters - £75.00 + Parts

(Includes labour element to strip down, clean, de-carb, replacement of any parts and bench test)

Inboard Diesel Engines - From £250.00 including parts (Trad stern Narrow Boats + £25.00)

(Includes labour element and parts to change engine & gearbox oil, oil, fuel & air filters (as required), test run) (any other parts will be charged on top)

Inboard Petrol Engines - From £295.00 including parts

(Includes labour element and parts to change engine & gearbox oil, oil, fuel & air filters (as required), test run) (Spark plugs and any other parts will be charged on top)

Volvo & Mercruiser Outdrives - Bellows, Gimbal Bearing, Shift Cables etc - From £500 including parts

Outboard Engines up to 8Hp - £90.00 including parts

Outboard Engines 8Hp to 19Hp - £125.00 including parts

Outboard Engines 20Hp to 49Hp - £165.00 including parts

Outboard Engines 50Hp to 99Hp - £215.00 including parts

Outboard Engines 100Hp to 149Hp - £265.00 including parts

Outboard Engines 150Hp and Above - From £325.00 including parts

(Includes labour element and parts to change engine & gearbox oil, oil, fuel & air filters (as required), Spark Plugs & test run) (any other parts will be charged on top)

(Your impeller can be changed in conjunction with your service for an additional £35.00 + Impeller)

All general Labour is charged at £50.00 per hour (min charge £35.00)

Gas Safe Register Gas work and specialist engineering is charged at £75.00 per hour (min charge £50.00)

Hire of Undercover Engineering Facility £30.00 per day, £175.00 per week or £600.00 per month

 

Narrow Boat Blacking

We offer Blacking services to meet all needs. Choose from any of the options below to build your own bespoke package, or just choose option 1 and do it yourself.

**** SAND BLASTING & 2-Pack Epoxy Blacking systems NOW AVAILABLE **** (quotation available on request)


Haul out of water and re launch including one week on the trailer: - £375.00
(additional weeks £175.00 per week)

Sandblasting of Hull up to Gunwale: - From £1000.00

Sandblasting of Topsides: - From £1200.00

Sandblasting of complete boat: - From £2000.00

High Pressure Jet wash: - £75.00

Full preparation with cup brushes and grinders: - £7.50 per foot

Blacking:
a. with International Intertuf 16 (min 3 coats): - £2.75 per foot per coat
b. with Comastic (min 2 coats): - £3.50 per foot per coat
(NB// Comastic can only be applied over existing comastic or to bare steel)

Visual inspection of anodes, skeg and rudder: - Free !!

Anode replacement: - £50.00 per anode including fitting (2.5Kg)
(We recommend Boats up to 45ft - 4 anodes, Boats over 45ft - 6 anodes)

Typical examples:

EPOXY Blacking - haul out, sandblasting of hull, 2-pack Epoxy Blacking :Prices From - £50/foot

57ft N/boat, haul out, pressure wash, DIY Blacking: - £450.00

57ft N/boat, haul out, pressure wash, 3 coats of Intertuf: - £920.25

57ft N/boat, haul out, pressure wash, Full prep, 3 coats of Intertuf: - £1347.75

57ft N/boat, haul out, pressure wash, Full prep, 3 coats of Intertuf & 6 anodes: - £1647.75

Full Boat Spray Painting Service now available for Narrow Boats & GRP Craft - 2-Pack also available.

We are now taking bookings for Narrowboats: Spray Painting time for narrowboat is approx six to eight weeks depending upon size condition and colour scheme required. Pricing starts from £100 per foot for a full repaint to topside, including non slip to gunwals and roof if required. Any craning or sandblasting fees will be be charged on top..

*** Update *** We are booking up painting slots fast, so book now to avoid any disapointment. Blacking services are still available on our slipping trailer.

Fibre Glass Craft: Vacancies are available for GRP craft painting and antifouling.

About Us | Site Map | Privacy Policy | Contact Us | ©2014 Selby Boat Centre